KINSPIRATIONSoftware for the K2700Waitlist
KOACH · ASRs · Lesson 3 of 5

What starts it

TriggerTrigger · ON · a control

An ASR starts when its trigger switches on: ON starts it with every note; a controller starts it when it passes halfway, pressure, the mod wheel, a button or a pedal; Rel State starts it when the key is let go.

SEE IT MOVE

SCOPE · LAST 6 S
THE TRIGGER AND THE ASR
0.00
0.00
0.00

Computed in your browser with KINSPIRATION's ASR engine, frame by frame.

WHAT TO KNOW

THE FIELD

Trigger, on the ASR page: ON, OFF, or any control source. A source counts as on above half its range; the ASR starts as it crosses.

RANGE

ON on a layer's ASR1 or ASR2: on from the key down until the key is let go. Rel State: on from the key's release, a release-triggered swell or dive.

USE IT FOR

ON for anything that belongs to each note; pressure or the wheel to bring an effect in when you ask for it; Rel State for a fall-off or a swell after the key is up.

WATCH OUT

A controller already past halfway when the note starts triggers nothing new: the ASR starts on the crossing. A Hold ASR on a controller lets go when the controller drops below half.

IN THE FACTORY PROGRAMS

1245 of the factory's 1566 ASRs start with every note (ON); the others wait for a control: pressure, the mod wheel, a pedal, a MIDI controller, or the key's release.

THE TRIGGER

ON (each note)1245
Pressure108
Press+MW88
MWheel38
Rel State (key let go)30
MIDI2914
SoftPd (soft pedal)13
OFF7

TRIGGERED BY A CONTROL, BY MODE

Hold162
Norm138
Rept14

FIND THEM ON YOUR K2700

681 High-End Hornslayer 1 · ASR1 Norm, Press, 0 / 1.7 / 30 s → FUN3 a
710 Fruity Flootlayer 2 · ASR1 Norm, MWheel, 0.1 / 1 / 30 s → PITCH src2 depth control
685 Dr. StAb'N SwElllayer 1 · ASR1 Norm, Rel State, 0 / 0.76 / 1.68 s → PITCH -4700
700 Bari Horn Sectionlayer 1 · ASR2 Hold, Press+MW, 0 / 0.26 / 6.2 s → FUN2 b
946 Modern Blockerylayer 1 · ASR1 Norm, SoftPd, 0 / 0.12 / 30 s → AMP -48
75 SlyBallad EPlayer 4 · ASR1 Hold, MIDI29, 0.02 / 0.7 / 0.58 s → LFO1 rate control +1.4

HOW TO ON YOUR K2700 · 710 Fruity Floot

Fruity Floot starts ASR1 with the mod wheel: the vibrato comes in when you push it past halfway.

  1. In Program mode choose 710 Fruity Floot (KEYPAD, 710, ENTER).

    Program mode with 710 Fruity Floot
  2. Press EDIT, layer 2 (CHANNEL/LAYER ▲), MORE, LFO+. ASR1's Trigger is MWheel: it starts when the wheel crosses the middle.

    The LFO+ page of 710 Fruity Floot, layer 2, the cursor on Trigger (MWheel)
  3. Hold a note and push the mod wheel up past halfway: the vibrato fades in. On DSP MOD the Pitch row's Depth Ctl is ASR1.

    The DSP MOD page of 710 Fruity Floot, layer 2, the cursor on Depth Ctl (ASR1)
  4. Press EXIT and answer NO to leave the factory program as it was, or SAVE to keep your version on a USER ID.