KINSPIRATIONSoftware for the K2700Waitlist
KOACH · FUNs · Level 2 · Mixing and comparing · Lesson 6 of 7

max(a,b)

sums and mixes= the larger of a and b

Passes whichever input is higher.

SEE IT MOVE

SCOPE · LAST 2 S
THE MAP · OUTPUT FOR EVERY a AND b
a0.00
b0.00
OUTPUT0.00

Computed in your browser with KINSPIRATION's FUN engine. Drag on the map to try any a and b.

WHAT TO KNOW

INPUTS

a: the source; b: the floor, or a second source.

OUTPUT RANGE

-1..+1

USE IT FOR

A floor: max(a, constant) keeps a source from falling under a value; two controllers where the further one wins without adding up (wheel or pressure).

WATCH OUT

With ON as an input the output is always 1: the factory's 16 slots of ON and Foot are a fixed 1.

IN THE FACTORY PROGRAMS

In 16 FUN slots of the factory programs: FUN1 16. GFUN2 and GFUN4 are the program's global FUNs.

MOST USED INPUTS (a, b)

ON, Foot12
Foot, ON4

WHERE THE OUTPUT GOES

FUN2 a15
2POLE HIPASS HP Frq src212
2POLE HIPASS HP Frq src11

FIND THEM ON YOUR K2700

852 Noisy Feedbackerlayer 8 · FUN1 · a Foot, b ON

HOW TO ON YOUR K2700 · 852 Noisy Feedbacker

Noisy Feedbacker uses max(a,b) on its layer 9: see it, then where it goes.

  1. In Program mode choose 852 Noisy Feedbacker (KEYPAD, 852, ENTER).

    Program mode with 852 Noisy Feedbacker

  2. Press EDIT, go to layer 9 with CHANNEL/LAYER ▲, then MORE and LFO+. The FUN1 row: Input a ON, Input b Foot (CC pedal 2), Function max(a,b).

    The LFO+ page of 852 Noisy Feedbacker, layer 9, the cursor on Function (max(a,b))

  3. Where it goes: MORE, DSP MOD. On the HP Frq row Source 1 is FUN1, with a Depth of 4700 ct.

    The DSP MOD page of 852 Noisy Feedbacker, layer 9, the cursor on Source 1 (FUN1)

  4. Move CC pedal 2 (Foot): the HP Frq row follows FUN1.

  5. Press EXIT and answer NO to leave the factory program as it was, or SAVE to keep your version on a USER ID.