The factory's functions
Gallerythe most usedOf the 59 functions, the factory programs lean on a handful: the 2POLE LOWPASS above all, then LOPASS, TREBLE, HIPASS, the two mid EQs and the shelves. The oscillators and the rarer filters come in where a sound needs them.
SEE IT MOVE
Computed in your browser with KINSPIRATION's DSP functions, sample by sample, their Pads at the factory's defaults.
WHAT TO KNOW
THE MOST USED
2POLE LOWPASS in more than half of all layers, usually first in its ALG, near 415 Hz with no resonance, moved by envelopes, keys and the panel.
THE TONE STAGES
TREBLE, LOPASS, PARA MID and the shelves after the main filter: small corrections, often at 0 dB until a control moves them.
USE IT FOR
A starting point for a layer: the factory's commonest function for each place and kind of sound.
WATCH OUT
A function at its neutral value (TREBLE at 0 dB, a filter wide open) still takes its blocks: free them when the sound needs another stage.
IN THE FACTORY PROGRAMS
8,828 VAST layers; the 2POLE LOWPASS is in 4,722 of them, 53 %, the next ten in 8,260 places.
THE MOST USED
AND NEXT
FIND THEM ON YOUR K2700
HOW TO ON YOUR K2700 · 675 Lucid Brass
Lucid Brass's first layer uses two of the factory's favourites: a HIGH SHELF and the 2POLE LOWPASS.
In Program mode choose 675 Lucid Brass (KEYPAD, 675, ENTER).
Press EDIT, then MORE and DSP CTL. The Shlf Frq row is C 6 1047 Hz: the HIGH SHELF's corner.
Down on the LP Frq row, F 7 2794 Hz: the 2POLE LOWPASS, the factory's most used function.
Press EXIT and answer NO to leave the factory program as it was, or SAVE to keep your version on a USER ID.